Which filter matches my filter jug?

    AquaMax filters fit jugs from different manufacturers excluding Laica. Replaces filters:

    Brita Maxtra,
    Brita Maxtra Plus+,
    Dafi Unimax,
    Aquaphor Maxfor,
    Aquaphor B100-25,
    AmazonBasics,
    PearlCo Unimax,
    Lauson AWF 102,
    Aqua Optima Evolve,
    Aqua Crest AQK07,
    MAVEA Maxtra,
    Filtr Makro,
    Anna Duomax,
    BWT MG2 +,
    FilterLogic FL-402H,
    Filtr Real,
    Bosch Tassimo*.

    AquaClassic filters fit jugs from different manufacturers excluding Laica. Replaces filters:

    BRITA Classic*,
    DAFI Classic*,
    Aquaphor B100-15*,
    FilterLogic FL601G*,
    FilterLogic FL601T*,
    Zelmer ZPJA3410*.

    AquaPro filters are only suitable for Wessper AquaPro 2.5 and 3.5 liter jugs.

    How long does 1 filter last?

    1 AquaMax and AquaClassic filters last for about 1 month of work. 1 AquaPro filter is enough for about 2 months of use. Filter usage depends on the frequency of use and the hardness of tap water.

    How to use the water filter?

    Instructions on how to use the filter can be found here: How do you use the filter jug?
    The filter is intended for tap water, which has already been pre-treated and is safe for health. Do not filter water of unknown origin and contaminated.

    How long does the filtration process take?

    The filtration process may take up to several minutes depending on the size of the pitcher and the filter.

    Do children can drink filtered water?

    The water purified with AquaMax and AquaClassic filters is for everyone. However, children under one year of age should be given boiled water regardless of whether it is filtered or from a bottle.
    Alkaline water is not recommended for small children, and adults should introduce it gradually.

    Is filtered water healthy?

    Filtered tap water is safe for health, tap water undergoes proper tests before it reaches homes, contains chlorine and various sediments. By using a filter, you remove chlorine, sediment, sand, rust and components that degrade the taste and smell of water.

    Can you filter water directly from the tap?

    Of course. In Poland / EU countries, tap water must meet certain standards that allow safe use of it. This means that you can drink water straight from the tap. However, to compensate for the content of chlorine and limestone, an additional cleaning with a jug filter is recommended.

    Should the water be boiled before filtering?

    Water does not require boiling before filtering.

    What ingredients does the filter remove from the water?

    Filters AquaMax and AquaClassic removes chlorine, pesticides, detergents, mineral salts responsible for water hardness.

    Does the filter remove bacteria?

    The filter does not remove bacteria. It is necessary to filter only tap water, which must meet certain standards, including bacteria. They are used to remove them chlorine, which worsens the taste and smell of water. By using a jug filter you reduce the concentration of chlorine in the water that has already been free of bacteria.

    Does the filter remove iron and metals from the water?

    Our filters do not remove iron and other metals (eg manganese) from water.

    Does the filter remove all minerals from the water?

    The filter significantly reduces the concentration of minerals responsible for water hardness. However, they are not removed completely. Purified water Wessper has mineral ingredients (their concentration depends on the composition of tap water), which are needed for the proper functioning of the body. Filtering improves the quality of water by removing chlorine, used to disinfect water, limiting the concentration of mineral salts, retaining sand, rust, sediments.

    What to do if the water does not flow through the filter?

    Remove the filter from the jug and shake it to change the arrangement of the filter mixture. The blockage of water flow may be caused by incorrect placement of the filtering mixture or improper preparation of the filter (no soaking of the filter, and then three filtering of water and pouring it out).

    Why does the filtered water contain black impurities?

    Black matter floating in water is a coal that is safe for health and can escape from the filter during pre-filtering. It includes soaking the filter in water for 15 minutes, then placing it in a jug and filtering the water 3 times, during this process pollutants may come out from the filter.
    During pre-filtration, the components of the mixture are activated, following the instructions prevents the release of contaminants along with purified water.

    Why the filter does not clean the water?

    The most common reason is the improper preparation of the filter (no soaking the filter, then filtering the water three times and pouring it) or improper filter installation in a jug, eg in Brita * pitchers, press the filter until it clicks, otherwise the water will overflow sideways and it will not be purified.

    A mixture spills out of the filter, what to do?

    Contact the seller from whom you have purchased the filter, replace it with a new one. The pouring out of the mixture from the filter may be caused by inadequate welding of the elements during production. This happens very rarely, but despite the improvement of production lines, there may be isolated instances of incorrectly connected filters.

    What’s in the filter composition?

    The filter mixture is different for standard and alkaline filters. In AquaMax and AquaClassic filters, the bed is silver impregnated activated carbon and ion exchange resin. AquaPro filters in addition to the aforementioned ingredients contain mineral and ceramic deposits, which allow water to be alkalized and reduce the ORP level.

    Does the filter have to be submerged all the time?

    The filter should remain soaked, allowing it to work optimally. Excessive drying of the filter mixture does not allow for proper water filtration.

    Where to throw away the used filter?

    The filter can be disposed of in municipal waste, its composition is safe and does not threaten the environment, while the housing is made of plastic, which can be recycled.

    What are the differences between the filter models?

    They are three types of filters are available: AquaMax and AquaClassic – standard filters remove chlorine and limestone; AquaPro are alkalizing filters, raise the pH of water and reduce ORP.
    Each filter type is designed for a different kind of jug, AquaPro filters fit only into Wessper AquaPro jugs, while AquaClassic and AquaMax match jugs of different brands, before selecting you should check in the product specification whether they match the selected model.

    What is a water filter jug and what is it for?

    The filter jug is used to improve the quality of tap water. The filter mounted in it reduces chlorine concentration and softens water. Jugs with AquaPro water ionizer additionally increase the pH of water and reduce the level of negative ORP (water becomes an antioxidant).

    How to use a water filter jug?

    1. Wash the jug with a mild detergent every time you replace the filter.
    2. Unpack the filter from the foil and soak it in water for 10-15 minutes.
    3. Place the filter in the jug.
    4. Fill the jug with water and then pour out the filtered water. Repeat the process 2-3 times to clean the filter.
    5. Set the filter wear indicator.
    6. The water filter jug is ready for use.

    What kind of plastic is the filter jug made of?

    The jug is made of ABS plastic, free of BPA. This material is approved for contact with food and has the appropriate certificates (CE, RoHS).

    Is the water filter jug has guarantee?

    We offer a 24-month warranty, but do not cover any mechanical damage, such as: a crack during a fall.

    Does the water filter jug have a filter use indicator?

    It has an electronic filter wear indicator in which you choose the number of people using the filtered water. The indicator will signal the need to change the filter in a timely manner – a blinking X symbol will appear.
    There is also a manual indicator in the 2.5 liter jugs, where you can set the filter date in the jug.

    How to clean the jug? Can it be washed in a dishwasher?

    Clean the jug with a mild detergent or use a dishwasher. To do this remove the lid and pull out the center of the jug. With the electronic indicator, wipe the part with a damp cloth so as not to damage the mechanism.

    Why does a green or white covering appear in the jug?

    Green sediment is growing algae. They can appear in a favorable environment: the location of the pitcher in a warm, sunny place. To prevent this, wash the jug at least every time you replace the filter and store the jug with water in a cool place, the refrigerator.

    The white precipitate appearing on the lid and the top of the pitcher is a limescale that precipitates from the water. You will remove the using citric acid.The white precipitate formed due to the use of AquaPro filters is a normal situation, because this filter enriches water into minerals and thus alkalises it. The filter is not intended for softening water, but for alkalinizing and raising the pH.

    How much water pour into the filtering jug?

    Fill the entire top part of the pitcher.

    Where can I buy a filter jug?

    As a producer, we do not run direct retail sales. All our products are available from distributors. You can find a list of stores HERE.

    I received a broken jug, can I return it?

    Contact the seller from whom you made the purchase. After considering the complaint, the jug will be replaced with a new one.

    How to choose the right a bag for your vacume cleaner?

    Select vacuum cleaner bags and filters based on the vacuum cleaner model. With our products you will find a list of vacuum cleaners to which they fit. You can find the model of your vacuum cleaner on its nameplate.

    How do I check which vacuum cleaner model I have?

    The vacuum cleaner model can be found on the nameplate. It is usually mounted on the bottom of the device.

    Where to buy a bag, filter and other parts for the vacuum cleaner?

    You can buy bags and other accessories from our distributors, you can find the full list HERE

    How to choose a right vacuum cleaner brush?

    The nozzles and brushes are sized to the diameter of the vacuum cleaner tube. In Zelmer * vacuum cleaners the brushes are mounted inside the tube, the outer diameter of the brush is 31.5 mm, the inner tube diameter is 32 mm. In other vacuum cleaners the brush is mounted on the pipe, the inside diameter of the brush should be slightly larger than the outer diameter of the pipe.
    You can also choose a universal brush that will fit any vacuum cleaner by adjusting the clamping diameter (30-38 mm).

    How to use the fragnance for the vacuum cleaner?

    Wessper fragrances are intended for both bag and bagless vacuum cleaners. Place the fragrance cartridge in a vacuum cleaner bag or container.

    How often do you replace the vacuum cleaner filter?

    The frequency of replacement of vacuum cleaner filters depends on the intensity of use of the vacuum cleaner. On average, it is recommended to change once every six months. However, if the vacuum cleaner works worse, it overheats or its suction power decreases, then changing the filter can improve the operation of the device.

    Can I clean vacuum cleaner filters in the water?

    Filters made of polyester can be rinsed with water, but this does not guarantee the restoration of their original condition. Cellulose filters should not be cleaned in water, you can clean them mechanically to get rid of some impurities.

    What models does the moisture absorber fit for?

    The cartridge fits all absorbers with a tank for condensed water with a minimum capacity of 250g.

    In which space can I use an absorber?

    You can effectively use one cartridge in rooms up to 20 m2. In larger rooms, place the amount of absorbers appropriate to the area.

    Can the moisture absorber cartridge be used in the car?

    Can be used in the car, but it should be placed in the absorber, because the mixture absorbing moisture turns it into a liquid that condenses in the lower container of the absorber. Do not put the cartridge “loose” in the vehicle.

    What is the lifetime of the contribution to the moisture absorber?

    The cartridge works effectively up to 3 months, however, this time may vary due to the different levels of air humidity.

    The carbon filter does not match my hood, what should I do?

    The carbon filter should be cut to the size of the hood.

    How to use the iron stick?

    Spread the stick on the heated soleplate of the iron and, after cooling, rub the iron with cotton or other natural fabric.

    How to choose the tip for an electric toothbrush?

    The tips are intended for Oral-B and Philips toothbrushes. Here you will find a list of tips that match specific brush models.

    Oral-B brushes, except Sonic and Pulsonic *, fit:

    • – EasyClean
    • – CrossClean
    • – FlossClean
    • – WhiteClean
    • – DuoClean
    • – KidsClean
    • – PerfectClean
    • – TriClean

    Oral-B Sonic * fits for:

    • – SonicClean

    Oral-B Pulsonic * fits for:

    • – PulseClean

    Philips Sonicare toothbrushes except the Elite series fit:

    • – ProCare
    • – ProCare Mini
    • – KidsCare Mini
    • – KidsCare
    • – BrightCare

    For Philips Sonicare Sensiflex * brushes fits:

    • – FlexCare

    When to replace the tip of the toothbrush?

    Replace the tips every 3-4 months or when the fibers are worn out and deform.